How to make dipped work gloves

Dipped work gloves are a common protective glove, which widely used in industrial production, medical and health, laboratory and other fields. The production process of dipped work gloves mainly includes raw materials preparation, steel mold pretreatment, glove gluing, glove setting and curing, quality inspection and other steps.

Firstly, raw material preparation is the first step of dipped work gloves production, common raw materials include latex, auxiliaries and textiles, etc. These raw materials need to be fully inspected to ensure quality verified before used.

Secondly, the pretreatment of the steel mold is a key step in the production of dipped work gloves. The steel mold needs to be cleaned, degreased, and dedusted. At the same time, it is also necessary to coat the separating agent to ensure the separation between the gloves and the steel mold. This step can avoid the latex sticking to the steel mold, so the glove will not easy to deform after stripping.

Then, glove gluing is the core of the production of dipped work gloves. There are two ways to apply glue: coating method and impregnation method. The coating method is to apply the latex evenly to the surface of the glove mold and then cure it. The impregnation method is to suspend the glove mold in the latex, through the mold descending and rising process, the latex is coated on the mold, and then curing. During the gluing process, the uniformity of latex and the time control of impregnation is very important during the gluing process.

Next, setting and curing is an important part of the production of dipped work gloves. After gluing is completed, the glove mold is heated in the oven, so that the latex is cured at high temperatures and forms the shape of the glove. The curing temperature and time need to be determined by different latex characteristics to ensure the quality and performance of gloves.

Finally, quality inspection is the last step in the production of dipped work gloves. After the glove stripping, it is necessary to check the gloves appearance, size measurement, tensile test, chemical resistance test and other indicators. Only qualified gloves are accepted.

Each step of the dipped work gloves process is strictly control to ensure gloves with good quality and safety. At the same time, It is also necessary to choose the right raw materials and process according to the different application fields to meet the users requirements.